– Inmotion Center is the space-saving design machining center of fixed table and column traverse structure for long workpiece.
– TYPE-4 have JIS No.40 size spindle and Y-axis 400mm travel.
– The distance between operator and table is close, therefore setup of workpiece is easy.
– Inmotion Center is suitable for the machining of multiple workpiece because of wide machining range.
– Inmotion Center can install the angle head and machine the side of long workpiece.
Model | TK23S- 2000MV-4 |
TK34S- 3000MV-4 |
TK45S- 4000MV-4 |
TK66S- 6000MV-4 |
|
Table size | 2100 x 450mm | 3100 x 450mm | 4100 x 450mm | 6200 x 450mm | |
X-axis travel | 2000mm | 3000mm | 4000mm | 6000mm | |
Y-axis travel | 400mm | ||||
Z-axis travel | 310mm | ||||
Rapid feed speed X | 30m/min | 20m/min | |||
Rapid feed speed Y | 30m/min | ||||
Rapid feed speed Z | 24m/min | ||||
Tool shank type | MAS BT40 | ||||
Pull stud type | MAS P40T-II | ||||
Maximum spindle spee | 4000min-1 / 6000min-1[Op.] / 8000min-1[Op.] / 10000min-1[Op.] / 12000min-1[Op.] | ||||
Spindle motor output | 3.7/2.2kW (30min. / Cont.), 5.5/3.7kW (30min. / Cont.)[Op.] | ||||
No. of tool of ATC | 23 | 34 | 45 | 66 | |
Tool change time (Tool-Tool) | 7 Sec. |