– Inmotion Center is the space-saving design machining center of fixed table and column traverse structure for long workpiece.
– TYPE-5 have JIS No.50 size spindle and Y-axis 500mm travel.
– The distance between operator and table is close, therefore setup of workpiece is easy.
– Inmotion Center is suitable for the machining of multiple workpiece because of wide machining range.
– Inmotion Center can install the angle head and machine the side of long workpiece.
| Model | TK12S- 2000MV-5 |
TK20S- 3000MV-5 |
TK24S- 4000MV-5 |
TK40S- 6000MV-5 |
TK52S- 8000MV-5 |
TK52S- 10000MV-5 |
| Table size | 2100 x 550mm | 3100 x 550mm | 4100 x 550mm | 6200 x 550mm | 8200 x 550mm | 10200 x 550mm |
| X-axis travel | 2000mm | 3000mm | 4000mm | 6000mm | 8000mm | 10000mm |
| Y-axis travel | 500mm | |||||
| Z-axis travel | 450mm | |||||
| Rapid feed speed X | 30m/min | 20m/min | 15m/min | 10m/min | ||
| Rapid feed speed Y | 30m/min | |||||
| Rapid feed speed Z | 30m/min | 20m/min | ||||
| Tool shank type | MAS BT50 | |||||
| Pull stud type | MAS P50T-II | |||||
| Maximum spindle speed | 3000min-1 / 6000min-1 [Op.] / 8000min-1 [Op.] | |||||
| Spindle motor output | 9/7.5kW (30min. / Cont.), 11/9kW (30min. / Cont.)[Op.] | |||||
| No. of tool of ATC | 12 | 20 | 24 | 40 | 52 | 52 |
| Tool change time (Tool-Tool) | 7 Sec. | |||||
